Clutch pedal and clutch cable aligner
Old Donkervoorts are for the majority equipped with a clutch pedal without the available modification as shown here with the red line. This causes clutch cables or clutch cable mounting bolts to break.
The factory has a modification available as shown below. Make sure that a mounting bolt is used with a partly smooth surface in 10.8 strength steel. This prevents wear in the clutch cable mounting point. And make sure you carry a spare clutch operating cable in your Donkervoort. Always! The part number is: Remkaflex 56.2310
The pedal can be found in the pedal box. Check if your car has the modification.
The clutch cable is often cracking due to wrong alignment. It is easy o manufacture an alignment modification as seen below!
Note: The D8 GTO has an fluid operated system without clutch cable!