Special tools and workshop equipment required:
- Socket, 24 mm -T40363- (not illustrated)
- Oil pressure tester -V.A.G 1342, or equivalent aftermarket tool-
Checking oil pressure
Procedure
- Oil level OK
- Engine oil temperature approx. 80 °C
- Remove oil pressure sender
Removing
- Unplug electrical connector -1-
- Unscrew oil pressure sender -item 4- using socket, 24 mm -T40363-
- Screw oil pressure switch into oil pressure tester -V.A.G 1342-
- Screw oil pressure tester -V.A.G 1342- into bore for oil pressure switch in oil filter bracket
- Start engine
Oil pressure at idling speed: at least 1.0 bar.
Oil pressure at 2000 rpm: at least 2.5 bar.
- Install oil pressure sender
Installing
Installation is carried out in reverse sequence. Tightening torque 21 Nm.
Note: Renew seal (number 5) after removing.
